I’m a technical kinda guy, doing technical kinda stuff.
What I’m asking is how tf did text messages and whatever in the walkie talkies ignite a spark strong enough to ignite the PETN?
Pager with firmware that activates an output on date/time X/Y and triggers an ignition signal. That signal is sent o an actual detonator in the device, which sets off the explosive.
Radio with DTMF receiver that activates an output when, for example, touchtone 4 is received over the air, or alternatively if the radio has GPS, another date/time activation via firmware.
Both of these things are relatively trivial for a nation-state to pull off.
So yes, in both cases it’s possible that faulty devices are still around. However, if all the rest of your group has had exploding pagers and radios, most people in the same group would have dropped their still-working pager or radio into a bucket of water by now. There’s probably a few, and they’re probably being carefully taken apart right now to see how it was done.
Afaik such an idea was nonsense previously.
It’s not nonsense, it just takes planning and resources. And now that people know it is possible, buying and using any sort of equipment for your group without having the nagging concern there might be a bomb in it is impossible. And that’s a pretty powerful limiter.
There’s a lot to be said for “http://yourISP.com/~username” being available 24/7 at no particular effort to you.
90% of users when they are presented with the UAC popup when they do something:
“Yes yes whateverrr” <click>
I’ve got photos in Flickr dating from 1999 onwards. Ten thousand or so of them, and a couple of the early ones are now corrupted.
But they are my “other backup” for Google photos so I don’t mind too much. I also have a USB Blu-ray drive at home that I use to periodically burn M-Discs that I hand out to a few relatives.
That’s about as good as I can conveniently do for backup, and it’s probably better than the single-point-of-failure box of negatives that my parents have in their cupboard.
when they’re powered down.
There’s no periodic cell refresh in flash memory like there is in DRAM. When USB sticks are plugged in, all you are doing is powering up the flash chip and interface ICs.
You’d have to read a block then write it back to actually refresh the stored charges in the cells.
I don’t think there’s anything commercially available that can do it.
However, as an experiment, you could:
You could probably/eventually script this kind of operation if you have software that can automatically identify and group images.
Most times what I get when asking it coding questions is a half-baked response that has a logic error or five in it.
Once I query it about one of those errors it replies with, “You’re right, X should be Y because of (technical reason Z). Here’s the updated code that fixes it”.
It will then give me some code that does actually work, but does dumb things, like recalculating complex but static values inside a loop. When I ask if there’s any performance improvements it can do, suddenly it’s full of helpful ways to improve the code that can make it run 10 to 100 times faster and fix those issues. Apparently if I want performant code, I have to explicitly ask for it.
For some things it will offer solutions that don’t solve the issue that I raise, no matter how many different ways I phrase the issue and try and coax it towards a solution. At that point, it basically can’t, and it gets bogged down to minor alterations that don’t really achieve anything.
Sometimes when it hits that point I can say “start again, and use (this methodology)” and it will suddenly hit upon a solution that’s workable.
So basically, right now it’s good for regurgitating some statistically plausible information that can be further refined with a couple of good questions from your side.
Of course, for that to work you have to know the domain you’re working in fairly well already otherwise you’re shit out of luck.
The problem with stack overflow is that you need to know enough about the domain you’re working in to describe it accurately enough to search and find that previous great answer.
If you have no clue, and then naively ask the no-clue kinds of questions, because you have no clue, then you get beaten over the head about not searching for the existing answer that you don’t know how to search for.
If you’re interested in the systems behind Apollo, go find and read “Digital Apollo”.
It goes all the way through the project and describes in good detail everything, how they developed the control systems, the computer hardware, how the software was designed, how they implemented one of the first real computer systems project management, all the interactions between astronauts/test pilots who still wanted to “manually fly the lander”, the political back and forth between competing teams, the whole thing.
It’s a great read if you have a technical mindset.
They also came from a time when hard drives could draw several amps while in use and much more on spin-up. There was a good reason why SCSI drive arrays used to spin each disk up one-by-one.
Molex connectors are good for 10 amps or so, SATA connectors couldn’t have handled that amount of current.
Excuse me, “UXers” is not the preferred term any more. You should be using “HXers”, as per the article.
In my opinion, replacing “users” with “humans” feels wrong in much the same way as when incels replace “women” with “females”.
They are reducing the accuracy of the description. All users of computers can generally be assumed to be human. All humans cannot generally be assumed to also be users.
“Have you tried formatting your PC and completely reinstalling Windows? That often fixes icon misalignment on the desktop. Please upvote if this helps you!” - every “volunteer Microsoft Support Forum” representative ever.
Usually iterations of:
“Closed and locked due to duplicate of: (question asked 9 years ago about Visual Studio 2011 and Visual Basic, when you’re using VS code '22 and C#)”
“This seems like an XY problem, what are you really trying to accomplish?”, after a one thousand word post describing in detail exactly what you are trying to accomplish and the many different reasons why you can’t just use #GENERIC_EVERYDAY_METHOD.
Either that or the quick and dirty method that I want for a one off data conversion that uses standard libraries is heavily down voted and lost while the elaborate, all-cases-considered, 7-third-party-library-using answer becomes the top result.
“Hey Pizza Shop, it’s The Law here. Did you have any orders for an ‘A. Tate’ recently? You did? Where did you deliver them to? Ok, thanks.”
Stupider things have happened and if I was a detective you’d be damn sure I’d at least give this a try.
True. Hence my caveat of “most cards”. If it’s got LEDs on the port, it’s quite likely to signal which speed it is at with those LEDs.
I haven’t yet come across a gigabit card that won’t do 10Mbit (edit: switches are a different matter) but sometimes I’ve come across cards that fail to negotiate speeds correctly, eg trying for gigabit when they only actually have a 4 wire connection that can support 100Mbit. Forcing the card to the “correct” speed makes them work.
I’m guessing something like:
Robots.txt: Do not index this particular area.
Main page: invisible link to particular area at top of page, with alt text of “don’t follow this, it’s just a bot trap” for screen readers and such.
Result: any access to said particular area equals insta-ban for that IP. Maybe just for 24 hours so nosy humans can get back to enjoying your site.
Me: “This binary file is merely an approximate mathematical and statistical transform of the complainant’s “Deadpool 3”, your honour. If you care to glance through a few A4 pages of the binary representation of both items, you can clearly see that there is no direct copying involved, thus, no copyright claim can be upheld.”
Result: $250k fine, two years community service in anti piracy groups.
NVIDIA: “Each copyrighted work was ingested and a statistical model was generated that leverages that information for our own profit. We have no intention of compensating copyright owners for their information.”
Result: Oh you! Get out of here, you scamp! Ruffles hair
I hate the camera bumps. Just make the entire phone the same thickness and - hey! This is crazy, but maybe then you could then add a bit more structural integrity and put a bigger battery and a SD card slot and a headphone jack in there as well.
Someone with only a tenuous grip on their sanity, I’d imagine.
Something like a raspberry pi or equivalent, and use reverse SSH set up to connect to a server with a known address on your end.
This means that ports don’t need to be opened on their end.
Also if you go with a gateway host, shift SSH to a randomised port like 37465, and install fail2ban.