I’ve posted a few days ago, asking how to setup my storage for Proxmox on my Lenovo M90q, which I since then settled. Or so I thought. The Lenovo has space for two NVME and one SATA SSD.

There seems to a general consensus, that you shouldn’t use consumer SSDs (even NAS SSDs like WD Red) for ZFS, since there will be lots of writes which in turn will wear out the SSD fast.

Some conflicting information is out there with some saying it’s fine and a few GB writes per day is okay and others warning of several TBs writes per day.

I plan on using Proxmox as a hypervisor for homelab use with one or two VMs runnning Docker, Nextcloud, Jellyfin, Arr-Stack, TubeArchivist, PiHole and such. All static data (files, videos, music) will not be stored on ZFS, just the VM images themselves.

I did some research and found a few SSDs with good write endurance (see table below) and settled on two WD Red SN700 2TB in a ZFS Mirror. Those drives have 2500TBW. For file storage, I’ll just use a Samsung 870EVO with 4TB and 2400TBW.

SSD TB TBW
980 PRO 1TB 600 68
2TB 1200 128
SN 700 500GB 1000 48
1TB 2000 70
2TB 2500 141
870 EVO 2TB 1200 117
4TB 2400 216
SA 500 2TB 1300 137
4TB 2500 325

Is that good enough? Would you rather recommend enterprise grade SSDs? And if so, which ones would you recommend, that are m.2 NVME? Or should I just stick with ext4 as a file system, loosing data security and the ability for snapshots?

I’d love to hear your thought’s about this, thanks!

  • turbo_scanning@feddit.de
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Today, growing a pool is possible by adding a vdev, right?

    So, instead of RAIDZ2, one could setup their pool with mirrored vdevs.

    However, I’m not sure about the self-healing part. Would it still work with mirrored vdevs, especially when my vdevs consist of two physical drives only?

    • Yote.zip@pawb.social
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Mirrored vdevs allow growth by adding a pair at a time, yes. Healing works with mirrors, because each of the two disks in a mirror are supposed to have the same data as each other. When a read or scrub happens, if there’s any checksum failures it will replace the failed block on Disk1 with Disk2’s copy of that block.

      Many ZFS’ers swear by mirrored vdevs because they give you the best performance, they’re more flexible, and resilvering from a failed mirror disk is an order of magnitude faster than resilvering from a failed RAIDZ - leaving less time for a second disk failure. The big downside is that they eat 50% of your disk capacity. I personally run mirrored vdevs because it’s more flexible for a small home NAS, and I make up for some of the disk inefficiency by being able to buy any-size disks on sale and throw them in whenever I see a good price.